How It Works

Discover How To Use Sanigone

How to use the Total Release

  1. The SANIGONE aerosol should be shaken well before use.
  2. Close all doors and windows.
  3. Ensure that the area is free of people, animals and food.
  4. Place the aerosol on the floor in the middle of the room to be sanitised. It is best to rest it on a small dry cloth in case of any overspill.
  5. Ensure that there are no smoke alarms directly above the aerosol.
  6. Press and lock the total release valve located on the top of the aerosol to activate.
  7. Exit the area and close the door.
  8. Avoid re-entering for at least 20 minutes and ventilate if required on re entry.
  9. The high alcohol content will ensure complete evaporation leaving no sticky residue.
  10. NB: Once the aerosol has been activated it cannot be stopped

How to use the Total Blast

  1. Shake well before use
  2. Ensure the directional spray is pointed away from the user and any other people or animals in the room
  3. Press the nozzle for approximately 2-3 seconds to release a blast of the sanitiser which will cover an area of 20m³
  4. As well as eliminating 99.99% of all enveloped coronaviruses and many other germs, the spray delicately scents your space with pine

How to use the Anti Viral Wipes

To avoid risks to people, animals and the environment follow the instructions for use:

  1. Open flap on lid
  2. Pull wipe through perforated hole being careful as there are sharp edges which may cause injury
  3. Tear off single sheet and close flap
  4. Apply wipe to areas to be treated avoiding contact with eyes
  5. Leave to dry naturally
  6. Once the wipe becomes dirty, replace it with a fresh one

How to use the Anti Viral Dog Disinfectant & Deodoriser

  1. Press top to spray
  2. For bedding, equipment or floors, remove visible debris and spray directly onto surface
  3. Wipe with clean cloth or may be left to dry naturally
  4. Process may be repeated as often as required
  5. May be sprayed directly onto dog avoiding face and sensitive areas

How to use the Anti Viral Quick Wash

  1. Pump a liberal quantity of foam into hands and massage into the dog’s face area or coat
  2. Take care when cleaning facial area and try to avoid getting shampoo into dog’s eyes
  3. Dry off thoroughly
  4. Repeat as necessary

Cleans &
Disinfects

Longer Lasting
Protection

Kills Bacteria
& Viruses

VIEW PRODUCTS